Road Series

Standard Features Of Road Series Power Packs

Power Control Switch: Two full/half/quarter power switches to provide seven basic power settings. Arc proof.

Combined/Ratio Output Switch: One switch lets you toggle between Symmetrical and Asymmetrical routing of the “A” and “B” flash head outlet banks. Arc proof.

Variator Control: Two f/stop variator allows you to fine-tune your basic power settings in 2/10 stop increments. When used with the power control switches, it provides numerous a 6 f/stop range,

Power / Modeling Light Control: Three positions – On/Model On, Power Off, or On/Model Off.

Flash Head Outlets: Three Arc protected so you can plug and unplug flash head cables without shutting down the power pack.

Ready Light Test Switch: This low profile button serves as a flash test switch and signals 100% flash readiness.

Audible Ready Indicator: 100% recycle indicator with its own ON/ OFF switch for applications that demand it.

Sync Input Socket/Built In Wein Slave Eye: Switch between standard mono plug sync cord, or trigger remotely with the built in Wein Slave Eye, which responds consistently to other flash sources or infrared triggering. ISO approved low voltage sync circuit.

Specifications Rp400 Rp800 Rp1600
Total Power 400 w/s 800 w/s 1600 w/s
Recycle Time (Full Power) Sec. 1 1.2 2.2
Flash Duration – Full 1 Head – Min. 2 Heads 1/1000 – 1/4500 1/550 – 1/4200 1/350 – 1/1690
Shot-to-Shot Consistency 1/10 – ƒ-stop 1/10 – ƒ-stop 1/10 – ƒ-stop
Color Shift, over ƒ-stop range ± 80º Kelvin ± 80º Kelvin ± 80º Kelvin
Maximum Heads Allowed 3 3 3
ƒ-stop range 6 6 6
Built-In Wein Slave Eye Yes Yes Yes
Built-In PocketWizard™ No No No
Sync Circuit Voltage 10v 10v 10v
Flash Ready Indicator Yes Yes Yes
Amp Draw 7 14 14
Distribution Ratio/Combined Ratio/Combined Ratio/Combined
Weight (lbs.) 4.1 5.3 7.2
Dimensions (WxDxH) including handle 5.875″ x 6.875″ x 5.375″ 5.875″ x 6.875″ x 6.25″ 5.875″ x 6.875″ x 8″